Description
Format-specific capacity — the QMY18-15 egg laying block machine is quoted with output tied to a named block size, so daily production targets match what you actually plan to sell, not a catalogue headline number.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | QMY18-15 |
| Product Type | Mobile Egg Laying Concrete Block Making Machine |
| Rated Power | 24 kW |
| Voltage & Frequency | Customized to local industrial voltage (confirm before order) |
| Control System | PLC |
| Working Method | Hydraulic pressure station |
| Output Capacity | ~34,000 pcs/shift based on 400×200×200 mm hollow block |
| Pallet Requirement | None — egg-laying on ground |
| Block Type | Hollow, solid, paving, and other formats (confirm mould selection) |
| Automation Level | Semi-automatic with PLC control |
| Stacking Method | Manual — blocks laid directly on ground |
Application Suitability
| Application | Material or Output |
|---|---|
| On-site hollow block production for housing projects | Crushed stone, sand, cement, water — laid directly on prepared ground |
| First block plant for entrepreneurs with limited capital | No pallet investment required; ground serves as curing surface |
| Remote job site production for concrete product manufacturers | Mobile frame moved across site as work progresses |
| Paving block and solid brick runs for local building material supply | Mould change required; format-specific cycle times apply |
What "34,000 Pieces per Shift" Actually Means for Your Block Size
Output figures are only honest when tied to a specific block format and mix design.
Catalogue capacity numbers for the QMY18-15 egg laying block machine typically assume a standard 400×200×200 mm hollow block. If your market sells 150 mm solid blocks or interlocking pavers, the cycle time and pieces per mould change — meaning real daily throughput shifts accordingly. [NEED_CITE: cycle time variation across block formats in mobile egg laying machines] I once worked with a buyer who ordered based on a headline capacity number, only to discover his smaller block format required nearly double the mould fills per shift. The machine was fine; the expectation was wrong from the start.
Matching Mould Selection to What Your Market Actually Buys
The QMY18-15 egg laying block machine supports interchangeable moulds for hollow blocks, solid blocks, and paving formats. Before confirming an order, the critical step is listing the exact block dimensions your local buyers purchase, then verifying which moulds are in the available catalogue. A machine that produces formats your market does not sell ties up capital in idle tooling.
Mould Change Procedure and Format Flexibility on Site
Switching between formats requires a planned mould change, and the time this takes depends on the bolt pattern and alignment system fitted. On mobile egg laying machines, this work happens in the field, often without a dedicated tool bench. [NEED_CITE: mould change procedures and downtime expectations for mobile block machines] Confirm the tools needed, the alignment method, and whether the PLC stores cycle parameters per mould — so operators are not re-tuning pressure and vibration from scratch each time.
Reading the Specs That Actually Shape Your Daily Output
The 24 kW rated power drives both the hydraulic pressure station and vibration system. Hydraulic pressure determines how tightly the mix is compacted before vibration begins; vibration force then settles the aggregate into a dense matrix. When these two are not matched to your local aggregate gradation — say, a high-fines sand that resists compaction — block strength drops even if the cycle count looks fine. PLC control stores operating parameters so that once the correct pressure and vibration duration are established for a given mix, operators replicate the same result batch after batch. Since the machine lays blocks directly on ground with no pallet system, the curing surface preparation becomes part of the production workflow rather than a separate handling line.
The Cost of Skipping the Mix Design Conversation
When a machine is configured for a standard aggregate blend the buyer cannot source locally, the result is either weak blocks or expensive material substitution. [NEED_CITE: aggregate gradation requirements for consistent concrete block strength] I have seen situations where the local sand contained clay levels that extended the cycle time noticeably, cutting actual daily output well below the quoted figure. The fix — adjusting the mix or the machine’s dwell settings — should happen before the machine ships, not after it arrives on site.
Why Sourcing This Machine Here Makes a Difference
Block machinery is the single focus here, which means the QMY18-15 egg laying block machine is specified alongside its mould, power configuration, and control language as one matched package rather than a press pulled from a generic catalogue. Capacity calculations state the block format assumed, so there is no surprise when the line starts running. Mould design covers the formats your market actually demands, with custom drawings available where standard tooling falls short. The semi-automatic PLC platform allows a buyer to start with this mobile unit and later add automation modules if production scales up. Installation support includes on-site commissioning and operator training, so the crew understands cycle tuning and maintenance before the first production day ends.
Documentation & Verification
- Line layout and capacity calculation stating the block format used for output figures
- Mould drawing and format list confirming available block sizes and change procedure
- Voltage, frequency, and PLC display language confirmation document before shipment
- Factory test record run on your specified block format prior to dispatch
- Operation and maintenance manual with wear parts and mould replacement list
Installation, Commissioning & Support
- Ground preparation guidance for egg-laying surface, ensuring level curing area across the site
- 24 kW power supply requirement with dedicated circuit breaker and correct voltage configuration
- On-site assembly scope confirmed before shipment, covering hydraulic station and PLC wiring
- First-run commissioning with cycle parameter tuning matched to your aggregate and block format
- Operator training covering PLC navigation, mould change steps, and daily maintenance checkpoints
- Wear parts and mould catalogue list provided for first replacement planning
What to Include in Your Inquiry
To size the QMY18-15 egg laying block machine correctly, share the block formats your market sells, including exact dimensions and whether hollow or solid. Specify your local aggregate type and any known characteristics like clay content or moisture levels. [NEED_CITE: voltage and frequency standards by export market] Confirm your site voltage, frequency, and preferred PLC display language so electrical and control specifications are locked before production begins.
Frequently Asked Questions
Q: What is the realistic daily output of the QMY18-15 for my specific block format?
A: The quoted capacity of approximately 34,000 pieces per shift is based on 400×200×200 mm hollow blocks. Smaller or solid formats change the pieces-per-mould count and cycle time, so daily output must be recalculated for your exact block size and mix design before ordering.
Q: Which block formats and mould sizes are available for the QMY18-15?
A: The machine supports interchangeable moulds for hollow blocks, solid blocks, and paving formats. The available mould catalogue should be confirmed during inquiry to ensure your target block dimensions are covered, and custom mould designs can be developed from buyer-supplied drawings.
Q: How long does a mould change take on this machine, and what tools are needed?
A: Mould change time depends on the bolt pattern and alignment system fitted to your machine. Confirm the specific procedure, required hand tools, and whether PLC parameters store settings per mould so operators can switch formats without full recalibration.
Q: What voltage, frequency, and PLC language options should I confirm before ordering?
A: Voltage and frequency are customized to your local industrial supply, and the PLC display language is configurable. All three must be confirmed in writing before production starts, as changes after the electrical panel is built cause delays and rework costs.
Q: What mix design and aggregate gradation does the machine require for consistent block strength?
A: The hydraulic pressure and vibration settings must match your local aggregate’s particle size, shape, and fines content. Share a sample or gradation report during inquiry so the machine’s cycle parameters are tuned to your actual material, not a generic default.
