Description
Single-focus block machinery — every LY2-10 configuration pairs the press, mould, and pallet as one matched system sized against your local interlocking brick format, not assembled from separate catalogue defaults.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | LY2-10 |
| Product Type | Clay Interlocking Block Making Machine |
| Machine Type | Semi-automatic clay and cement interlocking brick making machine |
| Machine Power | 7.5 kW |
| Molding Cycle | 10 s |
| Output Capacity | 6000 pcs/8 hours (basis not stated in source — confirm block format, material, and thickness) |
| Bricks per Mould | 1 pc |
| Raw Materials | Clay, soil, earth, mud, concrete, cement, fly ash |
| Overall Dimensions (L×W×H) | 1300 × 1800 × 2400 mm |
| Automation Level | Semi-automatic |
| Mould Formats Available | 300×150×100 mm, 250×125×75 mm, 230×220×115 mm interlocking |
| Key Features | Hydraulic pressing, interlocking mould compatibility, semi-automatic operation |
Application Suitability
| Application | Material or Output |
|---|---|
| On-site housing project block production | Locally sourced clay and soil mixed with cement stabilizer |
| Small-to-medium interlocking brick plants | Earth and mud blends graded for compressive strength targets |
| Concrete product manufacturers adding formats | Cement and fly ash mixes for interlocking paver or wall brick lines |
| Entrepreneur-led first block plants | Low-capital clay or soil deposits with minimal processing |
What the "6000 Pieces per Shift" Capacity Figure Leaves Out About Clay Interlocking Block Machine Specifications
Capacity only matters when tied to the exact block format and mix your market buys.
Quoting a single daily output number without stating the brick dimensions, material density, and curing method leaves buyers planning around a figure that rarely survives contact with their actual workshop. I have watched a semi-automatic press like this drop to half its stated throughput because the local red clay was stickier than the standard test sand, causing demoulding delays that no catalogue table warned about. Choosing a clay interlocking block machine without first locking in your format and mix design is how projects start late. [NEED_CITE: common causes of output shortfall in semi-automatic block presses]
Matching the Interlocking Format to Your Local Market
The LY2-10 clay interlocking block machine supports three standard mould sizes — 300×150×100 mm, 250×125×75 mm, and 230×220×115 mm — each producing one brick per cycle. The 10-second molding cycle is a baseline that shifts depending on the material’s moisture content and the compaction pressure required for adequate demoulding. Buyers who sell multiple formats need to confirm mould change procedure and time before assuming a single machine can cover all SKUs in one shift.
Raw Material Compatibility Beyond the Datasheet
This press handles clay, soil, earth, mud, concrete, cement, and fly ash, but those labels cover a wide range of actual material behavior. A laterite-rich soil in West Africa behaves entirely differently from the alluvial clay used in factory testing, especially when moisture fluctuates during the rainy season. The 7.5 kW power rating must be evaluated against the specific compaction resistance of your local aggregate to ensure the hydraulic system can maintain consistent density across the shift. [NEED_CITE: soil plasticity index requirements for compressed earth brick production]
Reading the Specifications That Actually Matter
The 10-second molding cycle, 7.5 kW machine power, and overall dimensions of 1300 × 1800 × 2400 mm define the practical boundaries of the LY2-10. Hydraulic pressure and vibration force ratings are absent from the standard listing, yet these two parameters together determine whether a clay mix reaches the compressive strength your building code requires. The semi-automatic designation means an operator is still responsible for pallet handling and brick removal — plan your labour allocation accordingly. Mould change time is not published, which is a critical gap if your business model depends on producing two or three interlocking formats per day. Pallet size is also unspecified; confirm this against your existing curing racks and forklift dimensions before the machine ships.
The Hidden Cost of Choosing the Wrong Configuration
Specifying a clay interlocking block machine based on the lowest quoted price and the highest claimed output regularly leads to costly corrections after arrival. I have seen buyers discover at commissioning that their site voltage does not match the machine’s motor, forcing a transformer purchase that was never budgeted. Others find the pallet size incompatible with the curing racks they already own, meaning every brick must be restacked by hand before it enters the curing zone. When the local clay turns out to be too fine or too wet for the default mould settings, the machine produces scrap at a rate that wipes out any theoretical capacity advantage. [NEED_CITE: impact of unconfirmed voltage and pallet sizing on block plant commissioning delays]
Why Source the LY2-10 Here
Block machinery is the sole focus of this operation, so the LY2-10 is specified as a complete pressing system rather than a stand-alone unit with accessories bolted on later. Each configuration is set against your actual mix design, local aggregate characteristics, and the interlocking format your market demands — not a generic catalogue default. Mould design covers the formats that sell where you operate, and custom drawings are available when your market requires a non-standard size. The semi-automatic platform leaves a clear upgrade path to higher automation when your volume justifies it. Installation and commissioning include operator training so your team can run the machine from day one, and mould plus wear parts support continues after the line is producing.
Documentation & Verification
- Line layout and capacity calculation stating the exact interlocking format assumed for each output figure
- Mould drawing and format list confirming dimensions before production begins
- Hydraulic and electrical schematic for the LY2-10 matched to your confirmed voltage and frequency
- Factory test record on your specified clay or cement mix before dispatch
- Operation and maintenance manual with wear parts and mould replacement list
Installation, Commissioning & Support
- Foundation must accommodate the 1300 × 1800 × 2400 mm footprint and 7.5 kW power draw
- Confirm voltage and frequency match the LY2-10 motor specification before container loading
- Semi-automatic pallet handling requires clear workflow paths around the press station
- First-run commissioning includes hydraulic pressure and vibration adjustment to your local mix
- Operator training covers mould change, cycle timing, and daily maintenance intervals
- Wear parts list identifies hydraulic seals and mould liners specific to the LY2-10 format range
Preparing Your Inquiry
Share the exact interlocking brick format your market sells, the daily volume you need per format, and a description of the clay, soil, or cement mix available locally. Include your site’s voltage, frequency, and any existing curing racks or forklifts so pallet compatibility can be confirmed before the quotation stage. If your project has a fixed deadline, state it upfront so lead time and shipping arrangements align with your construction schedule.
Frequently Asked Questions
Q: How is the 6000 pcs/8 hours capacity calculated for the LY2-10?
A: That figure appears in source documentation without stating which block format, material, or thickness it assumes. Realistic output varies significantly between the 300×150×100 mm and 250×125×75 mm interlocking formats, and further depends on your clay or cement mix behaviour. Request a format-specific capacity calculation before basing your business plan on this number.
Q: Can I change moulds on the LY2-10 to produce different interlocking sizes?
A: Yes, the machine supports multiple interlocking mould formats including 300×150×100 mm, 250×125×75 mm, and 230×220×115 mm. Mould change time is not stated in the published specifications, so confirm this with the supplier if you plan to run more than one format per production shift.
Q: What clay or soil properties does the LY2-10 require?
A: The press handles clay, soil, earth, mud, concrete, cement, and fly ash, but performance depends on your specific material’s plasticity, moisture content, and particle size distribution. The machine configuration should be adjusted to match your local aggregate rather than relying on a catalogue default that was tested on different soil.
Q: What pallet size and curing setup does this machine need?
A: Pallet size is not published in the standard specifications for the LY2-10. You must confirm the required pallet dimensions against your existing curing area layout and forklift capacity to avoid costly manual restacking after every production cycle.
Q: Is the semi-automatic LY2-10 upgradeable to higher automation later?
A: The semi-automatic platform is designed with an upgrade path so you can add automated pallet feeding, stacking, or cubing as your production volume grows. Discuss your future capacity targets during the initial inquiry so the base configuration accommodates later expansion without a full machine replacement.
